Danh mục vật tư

A bill of materials (or BoM for short) documents specific components, along with their respective quantities, that are needed to produce or repair a product. In Odoo, as blueprints for manufactured goods and kits, and often include production operations and step-by-step guidelines, as well.

Thiết lập BoM

To create a BoM, go to Manufacturing app ‣ Products ‣ Bills of Materials and click New.

Next, set the BoM Type to Manufacture this Product.

Then, specify required components and, if necessary, define any manufacturing operations.

Mẹo

Individual BoMs can also be quickly accessed or created by clicking the Bill of Materials smart button on any product form, as accessible through the Sales, Inventory, and Manufacturing apps, as well as through any internal links where a product is referenced (such as in a field or a line item).

Hiển thị BoM cho sản phẩm có liệt kê các thành phần.

BoM cho Ngăn kéo, hiển thị tab Thành phần.

Thành phần

In the Components tab of a BoM, specify components used to manufacture the product by clicking Add a line. From the Components drop-down menu, select from existing products or create a new product by typing the name and selecting either the Create " " option to quickly add the line item, or the Create and edit... option to add the component and continue to its configuration form.

Thêm một thành phần bằng cách chọn thành phần đó từ menu thả xuống.

Optionally, access additional fields by clicking the (settings adjust) icon to the far-right of the Components tab. Tick the checkboxes for the following features to enable these columns:

  • Apply on Variants: specify which product variant each component is used in. When the field is left blank, the component is used in all product variants.

  • Consumed in Operation: specify the operation using the component. Useful for determining manufacturing readiness.

  • Manual Consumption: tick the checkbox to force operators to check the Consumed checkbox on a manufacturing order (MO).

    Hiển thị lệnh sản xuất, làm nổi bật trường *Đã sử dụng*.

    Not doing so triggers the Consumption Warning error message, where the consumed component quantity must be manually inputted. Otherwise, the operation cannot be completed.

    Hiển thị thông báo lỗi cảnh báo lượng sử dụng.

Hoạt động

Add an operation to a BoM to specify instructions for production and register time spent on an operation. To use this feature, first enable the Work Orders feature by going to Manufacturing app ‣ Configuration ‣ Settings. In the Operations section, tick the Work Orders checkbox to enable the feature.

Tính năng "Công đoạn" trong trang Cài đặt.

Next, navigate to the BoM by going to Manufacturing app ‣ Products ‣ Bill of Materials and selecting the desired BoM. To add a new operation, go to the Operations tab, and click Add a line.

Doing so opens the Create Operations pop-up window, where the various fields of the operation are configured:

  • Operation: name of the operation.

  • Work Center: select existing locations to perform the operation, or create a new work center by typing the name and selecting the Create " " option.

  • Apply on Variants: specify if this operation is only available for certain product variants. If the operation applies to all product variants, leave this field blank.

  • Duration Computation: choose how time spent on the operation is tracked. Opt for Compute based on tracked time to use the operation’s time tracker or Set duration manually if operators can record and modify time themselves.

    Choosing the Compute based on tracked time option enables the Based on last __ work orders option, which automatically estimates the time to complete this operation based on the last few operations. Choosing Set duration manually enables the Default Duration field instead.

  • Default Duration: estimated amount of time to complete the operation; used for planning manufacturing orders and determining work center availability.

  • Company: specify the company the BoM is available in.

Include operation details in the Work Sheet tab. Choose PDF to attach a file or Google Slide with public access to share a link. Select Text to type instructions in the Description text field.

Mẹo

Nhập / để biết danh sách các tùy chọn định dạng và tính năng, bao gồm cả ChatGPT.

Hiển thị tính năng ChatGPT để tạo hướng dẫn cho công đoạn.
Điền vào cửa sổ Tạo hoạt động bật lên.

Finally, click Save \& Close to close the pop-up window. To add more operations, click Save & New and repeat the same steps above to configure another operation.

Ghi chú

Each operation is unique, as it is always exclusively linked to one BoM.

Mẹo

After creating an operation, click the Copy Existing Operations button to choose an operation to duplicate.

Hiển thị tab Hoạt động, làm nổi bật trường "Sao chép hoạt động hiện có".

Hướng dẫn

Quan trọng

Để thêm hướng dẫn chi tiết vào hoạt động, bạn phải cài đặt ứng dụng Chất lượng.

Add specific instructions to an existing operation by clicking the operation’s (list) icon in the Instructions column. The number in the Instructions column shows the number of existing detailed instructions there are for the operation.

Hiển thị cột Hướng dẫn và biểu tượng danh sách.

On the Steps dashboard, click New to open a blank quality control point form where the new manufacturing step can be created. Here, give the specific instruction a Title and set the Type to Instructions. In the Instructions tab of the form, write out the directions for the step in the operation.

Ghi chú

Further customizations can be made here on this form, beyond ordinary instructions, to also include specific types of quality control points that carry specific (or complex) conditions. For more details about quality control points refer the Instruction check documentation.

Hiển thị trang để thêm kiểm tra chất lượng.

Thông tin khác

The Miscellaneous tab contains more configurations to customize procurement, calculate costs, and define how components are consumed.

  • Manufacturing Readiness: choosing When components for the 1st operation are available shows the Component Status as a green Not Available, when only the components that are consumed in the first operation are in stock. This indicates that although not all components are available, operators can at least begin with the first operation. Choosing When all components are available displays a red Not Available component status unless all components are in available.

    Mẹo

    Specify which operation consumes each component on the in the Manual Consumption field.

    Hiển thị trường *Trạng thái thành phần* trên trang chủ lệnh sản xuất.
  • Version: displays the current version, visible with the Odoo PLM app installed for managing changes.

  • Flexible Consumption: specifies if components used can deviate from the quantity defined on the . Choose Blocked if operators must adhere strictly to the quantity. Otherwise, choose Allowed or Allowed with Warning.

  • Routing: select the preferred warehouse’s manufacturing operation type for products produced in multiple warehouses. If left blank, this warehouse’s Manufacturing operation type is used by default.

  • Analytic Distribution: select pre-created analytic distribution models from the list to automatically record the cost of manufacturing products in the chosen journal.

  • Manuf Lead Time: define the number of days needed to complete a MO from the date of confirmation.

  • Days to prepare Manufacturing Order: number of days needed to replenish components, or manufacture sub-assemblies of the product.

Hiển thị tab *Thông tin khác* của BoM.

Thêm phụ phẩm vào BoM

A by-product is a residual product that is created during production in addition to the main product of a BoM. Unlike the primary product, there can be more than one by-product on a BoM.

To add by-products to a BoM, first enable the By-Products feature in Manufacturing app ‣ Configuration ‣ Settings. In the Operations section, tick the checkbox for By-Products to enable the feature.

Tính năng "Phụ phẩm" trong trang Cài đặt.

Once the feature is enabled, add by-products to a BoM by clicking the By-products tab. Click Add a line, and fill in the By-product, Quantity, and Unit of Measure. Optionally, specify a Produced in Operation for the by-product.

Example

Phụ phẩm, nho, được tạo ra trong quá trình Xay nho khi sản xuất Rượu vang đỏ.

Hiển thị phụ phẩm mẫu trong BoM.